31
Steel 115 Shed SeriesSteel 115 Shed SeriesSteel 115 Shed Series

Ezi-115 Shed Series

The ezi-roll Ezi-115 Shed Series roller shutter has been specifically designed to meet the requirements of the pre-fabricated shed market.

Product Description

The ezi-roll Ezi-115 Shed Series roller shutter has been specifically designed to meet the requirements of the pre-fabricated shed market.

The ezi-roll Ezi-115 Shed Series roller shutter is an industrial steel roller shutter that provides a cost effective alternative to a light industrial continuous curtain roller door. The Ezi-115 Shed Series industrial steel roller shutter is stylish, practical, easily transportable, wind resistant, secure and simple to install.

Some Key features of the ezi-roll Ezi-115 Shed Series roller shutter are;

  • The Ezi-115 Shed Series roller shutter is supplied standard with windlocks / security retainers to every shutter slat.
  • Heavy Duty interlocking 115mm steel slats can be supplied in either Powdercoat or Galvanised finish. The Ezi-115 Shed Series roller shutter curtain can be supplied in 0.6mm or 0.8mm gauge.
  • Available in sizes from 2m wide to 5.5m wide and 2m high to 5.5m high the Ezi-115 Shed Series will suit most commercial factory units and or sheds.
  • All Ezi-115 Shed Series roller shutter are supplied with 240v plug motor with UP/DOWN/STOP and emergency chain hoist.
  • As is the case with all Ezi-roll roller shutters, The Ezi-115 Shed Series boasts the unique supporting guide and head plate assembly which greatly reduces the load on the supporting fixtures.
  • The Ezi-115 Shed Series is extremely quick to install resulting in minimal interruption to the building construction process.
  • Modern Contemporary Appearance. The “Ezi-115 Shed Series” roller shutter slat is easily transported and packed due to its rigid roll formed flat steel face. Due to its sheer face design, when assembled this shutter provides a modern and stylish appearance complementing any mode of commercial architecture.
  • Modern and contemporary Appearance. The Ezi-115 Shed Series

For further information pertaining to opening details or door specifications please do not hesitate to contact your local ezi-roll Doors office.

Architectural Spec

Proprietary Item:
Ezi-roll “Industrial roller shutter” Ezi-115 Shed Series.

Door Curtain:
Interlocking 115mm rib profiled Powdercoated or Galvanised steel slats.

Wind Locks:
Provide windlock anchors to each and every slat in conjunction with 86mm x 2.5mm Galvanised windlock guides.

Axle:
Heavy duty steel pipe of diameter and wall thickness to suit size and mass of roller shutter designed to give minimum deflection. Axle shall incorporate steel bearings pre packed with lifetime grease.

Size:
0.6mm or 0.8mm gauge – thickness as recommended by manufacturer to suit size application and wind loads.

Emergency Operation:
Provide each roller shutter with emergency hand chain backup mechanism.

Operation:
Roller Shutter to be fitted with 240v motor and gearbox, all drive sprocket gearing, up/down/stop wall mounted controller and emergency hand chain in case of power failure. Motor mount plate shall incorporate safety chain break device to prevent door from descent in case of chain failure.

Images

Brochure

Call 1800 766 652